Hydraulic Pellet Press
Hydraulic Pellet Press
KAMEYO make Hydraulic Pellet Presses facilitate pressing sample pellets suitable for XRF spectroscopic analysis. The sample is milled to a suitable fineness, the powdered sample is mixed with Cellulose Powder, Wax or similar binder. The mixture is inserted into a pellet die and finally the die is compressed at pressures between 5 and 40 tons.
Technical Specification
| 1 | Force Range | 5 Ton to 40 Tons (Digitally Controlled) |
| 2 | Hydraulic Ram Speed | 3.2 mm / Sec (During Forward / Compression Stroke) 5.5 mm / Sec (During Return Stroke) |
| 3 | Hydraulic Pump Capacity | 4LPM @ 250 Bar |
| 4 | Hydraulic Pressure | 250 Bar Max. (Designed capacity) |
| 5 | Safe Operating Pressure | 200 Bar (Digital display of set load & Actual Load) |
| 6 | Time of One Pressing Sequence | Approx. 50 Sec. (Programmable) |
| 7 | Power of Hydraulic Pump | 3HP; Three-way plunger type |
| 8 | Power Requirement (to be provided by end user) | 4 Pole, 16 A MCB (3-Phase + Neutral with Earthing) |
| 9 | Motor | 415 V, AC, 50 Hz, 3-Phase, 3HP, 1440 rpm (Crompton / ABB) |
| 10 | Hydraulic Oil | Grade 68 or Equivalent |
Design Features
- Highly User-Friendly, Digital control from Touch Screen HMI, All Parameters are visible on the Screen.
- Automatic: Digital setting of Compression Force – 5 Tons To 40 Tons,
▪ Digital Setting Of Hold Time – 0 to 300 Seconds
▪ Digital Setting of Intervals of Decompression & return back to Off Position - Swing-Out cross head; Enabling fast change of die-sets and quick operation.
- Easy and fast loading and unloading of samples.
- Auto Cycles for each type of pelleting (Aluminium Cup, Ring & Bare Pellet) is provided.
- Separate die set shall be required for Type – A, B & C Pellets.
- Automatic compression, ejection and relief.
- Safety interlock and automatic pump Shut-off safety valve is provided for safe operation
- Operation in manual mode for all types of pelletizing is also possible.
- Floor mounting with solid and heavy base. No need for a foundation.
Hydraulic Pellet Press
KAMEYO make Hydraulic Pellet Presses facilitate pressing sample pellets suitable for XRF spectroscopic analysis. The sample is milled to a suitable fineness, the powdered sample is mixed with Cellulose Powder, Wax or similar binder. The mixture is inserted into a pellet die and finally the die is compressed at pressures between 5 and 40 tons.
Technical Specification
| 1. | Force Range | 5 Tons to 40 Tons (Motorised with Joystick) |
| 2. | Display | Analogue |
| 3. | Hydraulic Ram Speed | 3.2 mm / Sec (During Forward / Compression Stroke) 5.5 mm / Sec (During Return Stroke) |
| 4. | Hydraulic Pump Capacity | 4LPM @ 250 Bar |
| 5 | Hydraulic Pressure | 250 Bar Max. (Designed Capacity) |
| 6. | Safe Operating Pressure | 200 Bar (Analogue display of set load and actual load) |
| 7. | Power Requirement | 415V, 4 Pole, 16 A MCB (3-Phase + Neutral with Earthing) |
| 8. | Motor | 415 V, AC, 50 Hz, 3-Phase, 3HP, 1440 rpm (Crompton / Siemens) |
| 9. | Hydraulic Oil | Grade 68 or Equivalent |
Design Features
- Highly user friendly, Joystick controlled.
- Analogue display of pressure
- Swing-Out Cross-Head enabling fast change of die-sets and quick operation.
- Easy and fast loading and un-loading of samples.
- Provision to load dies for all types of pelleting is provided.
- Compression, ejection and relief is controlled by joystick only.
- Safety interlock and automatic pump shut-off safety valve are provided for safe operation.
- Floor mounting with solid and heavy base. No need for a foundation.
Hydraulic Pellet Press
KAMEYO make Hydraulic Pellet Presses facilitate pressing sample pellets suitable for XRF spectroscopic analysis. The sample is milled to a suitable fineness, the powdered sample is mixed with Cellulose Powder, Wax or similar binder. The mixture is inserted into a pellet die and finally the die is compressed at pressures between 5 and 40 tons.
Technical Specification
| 1. | Force Range | 5 Ton to 40 Tons (Digitally Controlled) |
| 2. | Hydraulic Pump Feed Rate | 3.2 mm / Sec (During Forward / Compression Stroke) 5.5 mm / Sec (During Return Stroke) |
| 3. | Hydraulic Pump Capacity | 4LPM @ 250 Bar |
| 4. | Hydraulic Pressure | 250 Bar Max. (Designed capacity) |
| 5. | Safe Operating Pressure | 200 Bar/li> |
| 6. | Operating Force Load | 40 Tons with a Digital Display of Set Load & Actual Load. |
| 7. | Cycle Time through PLC per Pellet | Max. 5 minutes |
| 8. | Power | AC, 415 V, 3 Phase, 50 Hz |
| 9. | Hydraulic Oil | Grade 68 or Equivalent |
Design Features
- Highly User Friendly, Digital control from Touch Screen HMI, All Parameters are visible on the Screen.
- Automatic: Digital setting of Compression Force – 5 Tons To 40 Tons,
▪ Digital Setting Of Hold Time – 0 to 300 Seconds
▪ Digital Setting of Intervals of Decompression & return back to Off Position - Swing-Out cross head; Enabling fast change of die-sets and quick operation.
- Easy and fast loading and unloading of samples.
- Auto Cycles for each type of pelleting (Aluminium Cup, Ring & Bare Pellet) is provided.
- Separate die set shall be required for Type – A, B & C Pellets.
- Automatic compression, ejection and relief.
- Safety interlock and automatic pump Shut-off safety valve is provided for safe operation
- Operation in manual mode for all types of pelletizing is also possible.
- Floor mounting with solid and heavy base. No need for a foundation.
