Laboratory Lathe Machine
Laboratory Lathe Machine
Application:
For preparation of Non-Ferrous samples for spectrographic analysis.
The facing is done during rotation by a single point tool suitably clamped in a tool holding device, which is very conveniently fed with the help of a hand wheel.
For preparation of Non-Ferrous samples for spectrographic analysis.
The facing is done during rotation by a single point tool suitably clamped in a tool holding device, which is very conveniently fed with the help of a hand wheel.
Technical Specification
| 1 | Maximum Size of sample | 3 x 3 inch |
| 2 | Feed | Automatic; to obtain a uniform and smooth finish. |
| 3 | Carriage | Lockable at any position to suit length and diameter of the sample. |
| 4 | Smooth Facing | No residual center mark after completion of facing. |
| 5 | Holding Chuck | Self-centering 3-Jaw Chuck |
| 6 | Insert Tool | Insert tool holder is provided. |
| 7 | Spindle Break System | Spindle break system is provided for quick stoppage of chuck after facing. |
| 8 | Emergency Stop | Switch for emergency stoppage is provided. |
| 9 | Coolant Circulation | Coolant circulation system with a tank capacity of 20 ltr with a suitable filter is provided. |
| 10 | Power (to be provided by end user) | 440V AC, 4 pole, 6 Amps MCB (3 phase with neutral + earthing) |
| 11 | Frequency | 50-60 Hz |
| 12 | Motor | 2 HP, 3 Phase 415 V, 2880 rpm. |
